Home > Cms Error > Cms Error List

Cms Error List

Contents

CMS ERROR 95 "Invalid message, unspecified" This cause is used to report an invalid message event only when no other cause in the invalid message class applies. However, the information element is not required to be present in the message in order for the equipment sending the cause to process the message. This cause is sent if the service request cannot be actioned because of congestion (e.g. CMS ERROR 81 "Invalid short message transfer reference value" This cause indicates that the equipment sending this cause has received a message with a short message reference which is not currently

The specifications define this as "unknown error". General Troubleshooting Tips Before I get into the full CMS ERROR code list, it may be worth offering some general troubleshooting tips, as the error codes themselves are usually quite cryptic. Of course we know, that sometimes it is hard to find the modem manual, this is why have published this information. When the error starts with "+CME ERROR", it means that the error is a device specific error code.

Cms Error 304

CMS ERROR 10 "Call barred" This cause indicates that the outgoing call barred service applies to the short message service for the called destination. An error code is provided for programmers to check what causes the message service failure. CMS ERROR 47 "Resources unavailable, unspecified" This cause is used to report a resource unavailable event only when no other cause applies. Preferred Message Storage (AT+CPMS) 23.

Introduction The error codes listed in this table are called CMS ERROR codes. Verify that you can actually send SMS messages using the SMS client in the mobile phone. Setting or Reading the Service Center Address / SMSC Address (AT+CSCA) 22. +cme Error: 3 IMSI not known).

The AT command +CPIN (command name in text: Enter PIN) can be used to send the PIN to the SIM card. 312 The SIM card requires a PH-SIM PIN to operate. If this document does not help, take a look at the following table: CMS ERROR 1 "Unassigned (unallocated) number" This cause indicates that the destination requested by the Mobile Station cannot The AT command +CPIN (command name in text: Enter PIN) can be used to send the PUK to the SIM card. 320 Memory/message storage failure. 321 The memory/message storage index assigned The system returned: (22) Invalid argument The remote host or network may be down.

It has typos / grammatical mistakes. Sms Error Code 69 From what we've seen, when this error occurs, it is usually the same as error 500. Final Result Code Specific to SMS AT Commands Preferences - Do not show ads The final result codes OK and ERROR are available to all AT commands. Checking if the GSM/GPRS Modem or Mobile Phone Supports the Use of AT Commands to Send, Receive and Read SMS Messages 20.

Cms Error 50

You can set the SMSC address by manually editing the SMSGW.INI file. error_code is an integer that is associated to a certain error. Cms Error 304 CMS (GSM Network Related) errors Here are the most common CMS errors: CMS ERROR: 1Unassigned number CMS ERROR: 8Operator determined barring CMS ERROR: 10Call bared CMS ERROR: 21Short message transfer rejected Cms Error 500 If you cannot, then there may be a problem with your account with the mobile operator. (Note: We have observed that with some mobile operators, if you buy a modem with

I posted a list of CMS ERROR codes on the NowSMS discussion board almost 5 years ago at http://www.nowsms.com/discus/messages/1/829.html. CMS ERROR 38 "Network out of order" This cause indicates that the network is not functioning correctly and that the condition is likely to last a relatively long period of time; CMS ERROR 29 "Facility rejected" This cause indicates that the facility requested by the Mobile Station is not supported by the PLMN. Note that after the occurrence of a +CMS error, the GSM/GPRS modem or mobile phone will not process the remaining AT commands in the command line. Gsm Error Codes

Below is the result displayed in Windows' HyperTerminal: AT+CGMI;+CMGR=11Nokia+CMS ERROR: 321 16.2.1.1. Connect to the modem using HyperTerminal, and issue the command AT+CSQ. the +CMS ERROR final result code will only be outputted by AT commands that are used to perform tasks related to SMS messaging. Try changing the "SMS Access" to "GSM".

CMS ERROR 99 "Information element non existent or not implemented" This cause indicates that the equipment sending this cause has received a message which includes information elements not recognized because the Cms Error 515 The +CMS ERROR Final Result Code -- Notifies the Occurrences and Causes of Message Service Failures The +CMS ERROR final result code is returned when a message service failure occurs. The following table lists the most common error codes.

To enable these extended commands, execute the following commands, or add them to your modems init string: AT+CMEE=1 AT&W Below you can find a list containing almost every error code supported

See +CMS error code 300 for the meaning of mobile equipment. 302 The operation to be done by the AT command is not allowed. 303 The operation to be done by All rights reserved Software PBX for Windows | VoIP SDK | Legal information | Privacy policy | Terms of use Please, address your inquiries to [email protected] Products Now SMS & MMS CMS ERROR 127 "Interworking, unspecified" This cause indicates that there has been interworking with a network which does not provide causes for actions it takes; thus, the precise cause for a Cms Error 604 CMS ERROR 69 "Requested facility not implemented" This cause indicates that the network is unable to provide the requested short message service.

The import template that you are using has merged columns.  Note that sometimes using Excel can sometimes add unwanted/unexpected formatting changes to the template.   Ensure the columns on your template match Follow @smslib 2002-2016, smslib.org, @ smslib at outlook.com Rechercher SOCIÉTÉPrésentationValeursNos bureauxPartenairesSupervisionTélécomTertiairePublicationsNewsletters2016Juin 20162015Novembre 2015Juin 20152014Décembre 2014Septembre 2014Juillet 2014Avril 20142013Novembre 2013Juin 2013Mars 20132012Novembre 2012Juin 2012Mars 20122011Novembre 2011Juillet 2011Mars 20112010Novembre 2010Septembre 2010Mai 2010Janvier 20102009Octobre CMS -  Layout Error:  There are multiple items named '____'.  Each item must have a unique name. However, the information element is not required to be present in the message in order for the equipment sending the cause to process the message. 111 - "Protocol error, unspecified"This cause

It can be used for: Phone calls from SQL Phone calls from HTTP Voice and SMS applications Callcenter developers If you are working on telephone solutions, please check out the Ozeki Send SMS with GSM Modem - CMS Error codes If you are trying to send an SMS messages with a GSM modem, the modem can return an error code in case If you receive an error not included on this list, please reach out to our support team via the 'submit a request' link at the top of this page and we'll From there, we know that the read message operation failed because an invalid memory index was assigned to the AT command +CMGR.

The best way to find this SMSC address is to move the SIM card from the modem temporarily to a phone, and go through the SMS configuration menus on the phone Remove the SIM card from the modem, and put it into a mobile phone. Introduction to SMS Messaging 2. Before I get to the list, and the sometimes cryptic definitions defined in the specifications, I want to highlight a few of the error codes that seem to occur most frequently.

E-mail: [email protected] If you have a technical question, please submit a support request on-line. CMS ERROR 8 "Operator determined barring" This cause indicates that the MS has tried to send a mobile originating short message when the MS's network operator or service provider has forbidden Instead of just displaying the "ERROR" message, it also shows an error number. We try to keep this list up to date, so please send your comments to [email protected] or post them in our forum.

Hence, the command line you entered, together with the response returned, will be displayed like this in a terminal program such as HyperTerminal of Microsoft Windows: AT+CMGR=11+CMS ERROR: 321 To find What is an SMS Center / SMSC? 5. DoubleDutch Support Updated September 26, 2016 21:48 Follow While working in the CMS you may encounter an error message while trying to import bulk template, alter the layout of your app, Most frequently, it seems that this error occurs when the modem simply does not have a signal, or it has too weak of a signal.

CMS ERROR Code List 1 - "Unassigned (unallocated) number"This cause indicates that the destination requested by the Mobile Station cannot be reached because, although the number is in a valid format, A list of some error codes and their meanings can be found in "Table of +CMS Error Codes and Their Meanings".