Home > Cms Error > Cms Error 322 Memory Full

Cms Error 322 Memory Full

Contents

Before I get to the list, and the sometimes cryptic definitions defined in the specifications, I want to highlight a few of the error codes that seem to occur most frequently. Only the 1st number in the list are getting the message. The USB driver doesn't have any logging capability. Ok GSM modem deinitialization .. http://allsoftwarereviews.com/cms-error/cms-error-memory-full.php

It was set up within 30 mins, you can send as many SMS to as many admins you want, it costs about 0,08 per SMS and it works fine. The log, you have posted above is the only log. If you try setting the SMSC value by manually editing SMSGW.INI … if the setting doesn't make a difference, always go back in and remove it immediately so that it doesn't Sending SMS Messages from a Computer / PC Using AT Commands (AT+CMGS, AT+CMSS) 26. why not find out more

Cms Error 38

I have verified that the +CMGS:xx is being sent by the Z-text, and appears to have been received by Host Monitor. Ok [21/12/2006 12:36:32] Sys Error: Cannot send message to 'number1'. That's why most advanced GSM devices support extended errors.

greetings, Ralph > "Enzo dell'Aquila" > Sent by: [email protected] > 09.08.2002 15:29 > > To: , > cc: > Subject: Re: Siemens M20 - Error 322 (Memory full) > Intra-operator SMS Messages 7. An invalid memory index is assigned to an AT command. Cms Error 500 Post to Cancel 官网 官方商城 透传云 登录 注册 简体中文 简体中文 首页 提交工单 开放工单 知识库 产品中心 资料下载 首页 > 知识库 > GPRS模块CME ERROR CODE 客户区域: 知识库 GPRS模块CME ERROR CODE 创建于: 382天6小时以前 |

Length is 0D while in the PDU above it is 0C (which is the right value), but with 0C I found absolutely no way to get the PDU through the M20... Cms Error Codes If the xx value is 99 (no signal), or lower than 10, you may have a signal problem. CMS (GSM Network Related) errors Here are the most common CMS errors: CMS ERROR: 1Unassigned number CMS ERROR: 8Operator determined barring CMS ERROR: 10Call bared CMS ERROR: 21Short message transfer rejected The SIM card is defined as a separate entity and is not part of mobile equipment. 301 SMS service of mobile equipment (ME) is reserved.

By default, HostMonitor uses 6000 ms timeout. Cme Error 3 Ok GSM modem deinitialization .. Hence, when an error occurs, you will not find both +CMS ERROR and ERROR in the command response. GSM modem error. +CMS ERROR: 322 "Memory full" was returned on AT command: AT+CMGS=30>00010018817017377671C4F0871023532100F10CD4F29C0E6A97E7F3F0B90C Com port close ..

Cms Error Codes

These error codes are defined in the ETSI GSM specifications, specifically GSM 07.05, GSM 03.40 and GSM 04.11. As mentioned earlier, after the execution of a command line, only one final result code is returned. Cms Error 38 The second parameter sets the Validity Period of the message. Cms Error 304 Final Result Code Specific to SMS AT Commands Preferences - Do not show ads The final result codes OK and ERROR are available to all AT commands.

If you are trying to send SMS using "SMS Test" window, it really sends SMS to first recipient only. Setting or Reading the Service Center Address / SMSC Address (AT+CSCA) 22. It does, but that isn't running when using Host Monitor. You may try to increase timeout. Cms Error 50

I have this setup as 2 seperate actions sms number1 sms number2 I have also tried setting it as 1 action using a comma to seperate the number but neither number Always restart the gateway service after making a change to the SMSGW.INI file. TrinhThiYen's Blog Blog at WordPress.com. this content Cheers Darren Can you post the log Back to top dazhallt5Joined: 02 Aug 2006Posts: 30Location: Hull, UK Posted: Thu Dec 21, 2006 6:25 am Post subject: Hi Paul, I'm not sure

greetings, Ralph > "Enzo dell'Aquila" > Sent by: [email protected] > 09.08.2002 15:29 > > To: , > cc: > Subject: Re: Siemens M20 - Error 322 (Memory full) > Gsm Error Codes Let's say there is only one SMS text message stored on our Nokia 6021 and it is stored in the memory location at index 1. This commands displays the codepages supported by the modem.

An error code is provided for programmers to check what causes the message service failure.

Max is it possible to generate a log from the Send SMS Action? Any other ideas? Regards, Max Back to top thomasschmeidlJoined: 15 Apr 2006Posts: 166Location: Germany, Bavaria Posted: Tue Dec 26, 2006 2:40 pm Post subject: @dazhallt5, Hi, we have an SMS-Service running via clickatell.com. Cms Error 515 Terms Privacy Security Status Help You can't perform that action at this time.

You signed out in another tab or window. The only thing you cannot monitor is your internet access itself If you are interested in more details, drop me a line. The AT command +CPIN (command name in text: Enter PIN) can be used to send the PUK to the SIM card. 320 Memory/message storage failure. 321 The memory/message storage index assigned have a peek at these guys AT+NDFT Loads the default configuration Resets the configuration to the factory default.

Just receiving the 1 SMS now!!! Any ideas whats wrong with the PDU generated by Kannel? Why NowSMS?